This guide will help you identify and understand common error codes displayed on your Beko dishwasher.

Understanding Beko Dishwasher Error Codes: A Troubleshooting Guide
Beko Dishwasher Error Codes: Fix Them Now!

Let’s dive into a comprehensive guide on Beko dishwasher error codes and how to troubleshoot them.

Understanding Error Codes on Your Beko Dishwasher:

When your dishwasher encounters an issue, it displays an error code on the panel. This code helps pinpoint the general area of the problem.

Troubleshooting Steps:

Before attempting any repairs, unplug your dishwasher for safety. Here’s a breakdown of common error codes and potential solutions:

Common Beko Dishwasher Error Codes:

The information below lists common Beko dishwasher error codes, their meanings, and possible causes.

E01: Overflow Error
  • Problem: The dishwasher detected excess water or a potential leak.
  • Solutions:
    • Check the overflow level gauge for proper placement.
    • Locate and repair any leaks causing extra water.
    • Ensure the float mechanism is installed correctly.
    • If the overflow microswitch isn’t working, replace it.
    • In rare cases, the water inlet valve or main control board may need replacement.
E02: No Water Error
  • Problem: Dishwasher isn’t receiving enough water.
  • Solutions:
    • Verify the dishwasher’s water tap is fully open.
    • Clean the filter screen on the water inlet valve.
    • Check the water inlet valve and flowmeter for proper function.
    • If necessary, replace faulty components.
E03: Heating Error
  • Problem: Dishwasher’s heating element isn’t working correctly.
  • Solution:
    • Inspect the heater’s wiring harness and resistance. If it is faulty, replace the heater or wiring.
    • In rare cases, the main control board may be the issue.
E04: Turbidity Sensor Error
  • Problem: Sensor monitoring water clarity malfunctions.
  • Solution:
    • Check the turbidity sensor for damage. If needed, replace the sensor.
E05: Diverter Valve Error
  • Problem: Malfunction with the valve controlling water flow direction.
  • Solution:
    • Inspect the diverter valve. If faulty, replace the valve.
E06: NTC Sensor Error
  • Problem: The NTC sensor (temperature sensor) isn’t functioning properly.
  • Solution:
    • Check the NTC sensor for damage. If needed, replace the sensor.
E08: External Board Communication Error
  • Problem: Issues with communication between the main control board and an external board.
  • Solution:
    • Verify that all connections are secure. If necessary, replace faulty components.
E13: Pressure Switch Error
  • Problem: Pressure switch malfunctioning.
  • Solution:
    • Inspect the pressure switch. If faulty, replace the switch.
E14: Drain Filter Error
  • Problem: A clogged drain filter prevents proper drainage.
  • Solution:
    • Clean the drain filter thoroughly to remove any blockages.
E17: Automatic Detergent Dosage Error
  • Problem: Issues with automatic detergent dispenser.
  • Solution:
    • Review the detergent settings in the dishwasher’s manual and adjust as needed.

By the way,

  • Regularly clean and maintain your Beko dishwasher according to the manufacturer’s instructions.
  • Use the correct type and amount of dishwasher detergent.
  • Avoid overloading the dishwasher, as this can hinder proper cleaning and water flow.


By following these tips, you can hopefully identify and resolve common Beko dishwasher error codes yourself.

Leave a Reply